3 Ways to Strip Paint from your Car without Causing Troubles

When it is about time to check what is really underneath the old paint of your car, there are lots of methods to choose on how to take it down. The first thing you need to do is to figure out how to handle the paint that is already there. Paint stripping is the removal of paint material from different surfaces using certain methods or techniques. For automotive purposes, most car paints behave the same way so you do not need to worry about how they would react with other chemicals during the removal process. Choose the type of method that suits your comfort level and available budget. There are three common ways to strip paints from your car namely chemical stripping, sanding, and blasting process.

Choose your type of technique

There are two general categories of paint stripping techniques namely physical and chemical means. When using mechanical stripping, it utilizes some forms of abrasive materials to remove the old paint from the car. These abrasive materials can be in a form of sandpapers or any variety of blasting media. On the other hand, chemical strippers can be bought in large bottles or drums depending on your paint stripping project. You can brush it straight to the metal sheet and let the chemical work for you.

Removing the car paint by chemical stripper

before applying the chemical stripper, make sure to remove everything from the exterior of your car including decals, rubber trims, and car accessories. Brush the chemical stripper over the surface of the car and let it stand for about 30 minutes or more. Use a putty knife or a nylon scraper to check if the chemical is ready for removal. Re-apply the chemical stripper if you cannot remove the paint easily or let the chemical stripper stand a bit longer. Scrape the entire surface of the car using a putty knife or any plastic scraper to prevent scratching the metal. For finishing touches, you may use coarse-grip sandpaper to remove excess paint that you cannot easily reach.

the power of sanding

whether you prefer a rotary or a dual-action sander, a power sander will tremendously cut your sanding time and strength for the day. Attach a 200-grip sanding disc to your preferred sanding machine. Peel off the back of the sanding disc then attach it to the sander. Sand the entire surface of your car until you remove the paint. Make sure to wear a respirator and a dust mask to protect yourself during the sanding process. Change the sanding disc to 400-grip or finer and sand again until the surface becomes smooth.

the technique of blasting

Remove the glass, rubber trims, decals, and chrome before applying sand blasting. Choose the type of medium and preferred sizes whether plastic particles or sanders. Depending on the condition of the old paint, you can select the sizes you want for blasting. Choose the nozzle size that is compatible with the compressor then attach the media. Begin removing all the paint by blasting the surface of the car. Make sure to wear protective gears like heavy gloves, respirators, and sandblasting hoods to avoid untoward incidents.